Water Intake Filter Mesh Wedge Wire Profiles Pressured Curved Sieve

For A Water Intake Filter Mesh Pressured Curved Sieve Wedge Wire Screen

Wedge Wire Screen Advantages:

1. The wedge tapered opening becomes progressively wider increasing dewatering efficiency.
2. Non plugging,to make sure the smooth circulation.
3. Slot sizes ranging form0.05mm to 20mm.
4. Durable and capable of carrying heavier loads without support structures.
5. One piece construction.
6. Wide range of materials.
7. Easy to clean,long service life,safe and reliable,low comprehensive cost.

Wedge Wire Screen Description

Pressured Curved Sieve Wedge Wire Screen are used in static sieves for either dewatering or classification.

As the slurry flows over the inclined screen surface, the perpendicular layout of the wires to the flow, allows

for solids to be retained while liquid passes through the screen.

Made from Vee-Wire screens,the 120 Sieve Bend Screen can provide up to 50 percent more open area

with a narrower wire profile.

With a number of manual-handling restrictions. Johanson Screens has developed an innovative split-sieve

design.

This design offers a simple, economical benefit by reducing the physical size and the weight of the screen.

Good quality sieve bend wedge wire sieve wrapped sieve bend screen for a water intake

Wedge Wire Screen Parameters:

Wedge wire is a welded steel structure, mainly used for filtration, separation and retention media.
1.Material: 304 316 316L stainless steel wedge wire
2.Slot: 0.2mm-5mm
3.Profile wire size: 1x2mm, 1.5x2.5mm, 2x3mm, 3x4mm etc
4.Support bar size: 2x3mm, 3x4mm, 3x5mm etc
5.If you have drawing, please send us.

Name	Pressured Curved Sieve Wedge Wire Screen
Wedge Wire	0.5x1.5, 0.75x1.5,1x2,1.5x2.5,2x3,2x4,3x5,etc.
Support Rod	1.5x2.5,2x3,3x5,4x7,5x8,etc,
Material	Stainless steel 304 304L 316 316L or as customer's request
Frame	No Frame or "L" Type frame, Ordinary Frame,5x10mm frame,etc. Customized is available
Arc height	10mm,15mm,20mm,50mm or depend on you size of screen panel.

 

Wedge Wire Screen Factors affecting screening efficiency:

 

1. The size of the feeding pressure.

The feed pressure should be 0.2~0.4MPa. The higher the pressure, the higher the screening efficiency,

and the lower the pressure, the lower the screening efficiency.

2. The arc surface of the nozzle and the sieve should be tangent. If the installation accuracy is too poor,

it will not be possible to produce the cutting effect, so the screen surface will not be able to screen the

material, or the movement of the material is blocked and the direction of movement is changed.

At this time, the screen surface will also lose the function of screening the material.

3. The effect of the fine grinding process before the sieve:

it cannot be ground too fine, otherwise the ground slag particles will enter the starch milk together with

the starch granules, which will increase the slag content in the starch milk.

 

Wedge Wire Screen details&Usages: