Product Details:
Payment & Shipping Terms:
|
Product Name: | Wedge Wire Screen Filter | Flange Thickness: | 20 Mm |
---|---|---|---|
Application: | Dewatering Filter | Filter Style: | From Inside To Outside |
Function: | Pre-filter, Filtering Suspended Matter, Water Purification Plant, Producing Fresh Water, Water Treatment | Strengthen Bar Thickness: | 8mm*8mm |
Slot Size: | 0.5mm | Types: | Filter Cylinder,water Filter Cartridge,filter Elements |
Diameter: | 200mm | Material: | 304stainless Steel |
High Light: | H600mm Wedge Wire Screen Filter,ID200mm Wedge Wire Screen Filter,OD240mm wire mesh pipe |
Stianless Steel 304 0.5mm Slot ID200 OD240 H600 For Dewatering Machine Wedge Wire Screen
Wedge wire screen filter information:
Wedge mesh filter using stainless steel wedge-shaped wire welding screen, filtration accuracy of 30-800μ wedge-shaped wire welding screen is made of stainless steel wedge-shaped wire and support welded into, mainly filter plate, filter basket, filter and other products.
Its finished products have the characteristics of high strength, high hardness, wear-resisting and corrosion resistance, uniform crack, good seepage, easy to clean and anti-cleaning.The main filter plate, filter basket, filter core and other products.Scope of application: used in petroleum, chemical, pharmaceutical, food and beverage, metallurgy, coal and other industries screening, water treatment filtration, etc.
Name |
Stianless Steel 304 0.5mm Slot ID200 OD240 H600 For Dewatering Machine Wedge Wire Screen |
||||
Material | Low carbon galvanized or stainless steel | ||||
Type | 1.The wire is the length of the screen and the rod is the circle of the screen 2.The wire is the circle of the screen and the rod is the length of the screen |
||||
Product Feature |
It's not easy to block | ||||
It can filter fine particles |
|||||
Normal Length | 600 mm | ||||
Slot Size | 0.05mm-35mm | ||||
Slot Direction | Radial Direction | ||||
Cylinder diameter | 10mm-1200mm | ||||
Usages | V wire reversed wrapped wedge wire screen is mainly used for water well screens designed for depths of 100 m, 200 m, 350 m & 600 m. |
Wedge wire screen filter Specification:
Min slot: 0.05mm.
Filter: From outside to inside.
Styles of connection: By welding or by threaded male/female coupling.
Standard length: 1m - 5.85m.
Wedge wire screen filter Features:
♦V-Shaped Slots: Openings shaped like a "v" that open toward the inside of the well tend to allow
the particles that are just barely smaller than the width of the slot pass. In other shapes of openings,
these particles would get caught in the screen and clog it.
♦Continuous Slots: The special design gives continuous slot opening across the periphery and length of
screen.
♦Very Large Open Area: This design gives continuous slot and hence the% open area for water to enter
is more than 2 times that of conventional slotted pipes of any size and slot opening. This allows more
water to enter at much lesser frictional head loss and the efficiency of tube well is improved appreciably.
♦Better Sand Filtration: Due to specialize manufacturing process, wide range of slot opening is available
down to 0.15mm to allow proper slot selection depending upon the size of sand in particular area.
This gives better sand control and reduced pump maintenance and longer tube well life.
♦Energy Saving: Due to reduce frictional head losses and increased discharge, the pump load reduces
the power required to pump same quantity of water. Power saving of around 20-25% is observed.
Wedge wire screen filter Advantage:
When compared to conventional slotted pipe, wire wrapped wedge wire screens have superior open
area due to their continuous slot openings. The benefits of which will:
. Reduce energy consumption and increase water flow.
. Reduce erosion of entry surfaces and increase well life.
. Allow a uniform and efficient well development.
. Reduce significantly potential pump damage and subsequent maintenance costs.
Contact Person: Grace
Tel: +86-18812181938