|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Wedge Wire Screen Filter | Flange Thickness: | Normally 10-20mm |
|---|---|---|---|
| Application: | Oil & Gas Industry, Refining & Petrochemical, Mining Industry | Filter Style: | From Inside To Outside |
| Function: | Pre-filter, Filtering Suspended Matter, Water Purification Plant, Producing Fresh Water, Water Treatment | Strengthen Bar Thickness: | 8*8mm 8*20mm |
| Slot Size: | 0.02-5mm | Types: | Filter Cylinder,water Filter Cartridge,filter Elements |
| Width: | 10-1500mm | Material: | Metal, SS304, 304L, 316, 316L |
| High Light: | 0.73mm Slot Wedge Wire Screen Filter,8*8mm Strengthen bar Wedge Wire Screen Filter,0.73mm Slot v wire screen pipe |
||
Stainless Steel 304 0.73mm Slot Ribb Add Filter Half Pipe For Water Filter Half Pipe
Half Pipe information:
The Cylindrical Wedge Wire is made up of rods and profile wire. The rod can be round wire, triangular
wire or trapezoid wire. The profile wire is triangular wire (V-shaped wire). This type of pipe screen has
a structure and high open area, as well as accurate slot dimension. At the same time, stainless steel
pipe screen has heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability
and so on characteristics. It can be used in many kinds of medium filtering.
| Name |
Stainless Steel Wedge Wire Ribb Add Filter Half Pipe For Water Filter |
||||
| Material | Low carbon galvanized or stainless steel | ||||
| Type | 1.The wire is the length of the screen and the rod is the circle of the screen 2.The wire is the circle of the screen and the rod is the length of the screen |
||||
|
|
It's not easy to block | ||||
|
It can filter fine particles |
|||||
| Normal Length | 400mm,500mm 550mm 600mm,602mm According to request | ||||
| Slot Size | 0.05mm-35mm | ||||
| Slot Direction | Radial Direction | ||||
| Cylinder diameter | 10mm-1200mm | ||||
| Usages | V wire reversed wrapped wedge wire screen is mainly used for water well screens designed for depths of 100 m, 200 m, 350 m & 600 m. | ||||
Half Pipe Specification:
Min slot: 0.05mm.
Filter: From outside to inside.
Styles of connection: By welding or by threaded male/female coupling.
Standard length: 600mm 700mm 800mm or customized
Half Pipe Features:
♦V-Shaped Slots: Openings shaped like a "v" that open toward the inside of the well tend to allow
the particles that are just barely smaller than the width of the slot pass. In other shapes of openings,
these particles would get caught in the screen and clog it.
♦Continuous Slots: The special design gives continuous slot opening across the periphery and length of
screen.
♦Very Large Open Area: This design gives continuous slot and hence the% open area for water to enter
is more than 2 times that of conventional slotted pipes of any size and slot opening. This allows more
water to enter at much lesser frictional head loss and the efficiency of tube well is improved appreciably.
♦Better Sand Filtration: Due to specialize manufacturing process, wide range of slot opening is available
down to 0.15mm to allow proper slot selection depending upon the size of sand in particular area.
This gives better sand control and reduced pump maintenance and longer tube well life.
♦Energy Saving: Due to reduce frictional head losses and increased discharge, the pump load reduces
the power required to pump same quantity of water. Power saving of around 20-25% is observed.
Half Pipe Advantage:
When compared to conventional slotted pipe, wire wrapped wedge wire screens have superior open
area due to their continuous slot openings. The benefits of which will:
. Reduce energy consumption and increase water flow.
. Reduce erosion of entry surfaces and increase well life.
. Allow a uniform and efficient well development.
. Reduce significantly potential pump damage and subsequent maintenance costs.
Contact Person: Grace
Tel: +86-18812181938
