|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Stainless Steel Wedge Wire Screen | Material: | SS304, SS304L, SS316, SS316L, SS321 |
|---|---|---|---|
| Other Callings: | Johnson Screen Pipe,Johnson Screen, Wire Screen Tube, | Application: | For Filtration Of Oil, Sand,water Well |
| Slot Size: | 0.1-3mm | Characteristics: | Anti-corrosion, Durable, Corrosion Resistant, Heat Resistant, Water Well Drilling Cylinder |
| Filter Rating: | Up To 99% | Length: | 2.9m / 5.8 M, Can Be Up To 6m |
| Support Rod: | Round,V Wire, Rectangular | Profile Wire: | V Shaped Wire |
| Diameter: | 2 " 3 " 4 " 5 " 6 " 8 " 10 " 12 " 14 " 16 " 20 ". 29 Mm - 1000 Mm. | End Connection: | Plain Beveled Ends For Butt Welding Or Threaded Coupling Or Flange |
| High Light: | OD 219mm Johnson Wire Screen,length 5850mm Johnson Wire Screen,length 5850mm water well screen pipe |
||
Energy Saving For Water Well Industry Stainless Steel Wedge Wire Screen
Stainless Steel Wedge Wire Screen Description
Stainless Steel Wedge Wire Screen is made by winding cold-rolled wire, approximately triangular in
cross section, around a circular array of the longitudinal rods.
The wire is attached to the rods by welding, producing rigid one-piece units having high strength
characteristics at minimum weights.
The wire is attached to the rods by welding, producing rigid one-piece units having high strength
characteristics at minimum weights.
There is a fixed value slot between each v wire, and the continuous slot, designed to provide maximum
open are to reduce entrance velocity, increase hydraulic efficiency and promote
more effective development.
Stainless Steel Wedge Wire Screen Specification:
| Material |
mainly stainless steel, carbon steel galvanized, carbon steel spray or other customer requirements material. |
| Grade | 205, 304,304L, 316L |
| O.D | 89mm 117mm 219mm 273mm 325mm |
| Size | 3-1/2" 4-1/2" 8-5/8 " 10-3/4" 12" |
| Slot size | 0.1mm-15mm, arbitrarily selected screen size to meet different construction requirements. |
| Length | 2.9m / 5.85 m, up to 6m |
| Connection Mode |
threaded connection, flange connection |
| Diameter | 2 " 3 " 4 " 5 " 6 " 8 " 10 " 12 " 14 " 16 " 20 ". 29 mm - 1000 mm. |
| Wire Shape | V Shape |
|
Characteristics |
Not easy to jam Slot even Strong corrosion resistance |
Stainless Steel Wedge Wire Screen Characteristics
♦Large flow rate: this kind of screen pipe has a relatively small resistance. Compared with the plastic
filter element with similar overall size, it greatly increases its flow area, so under the same resistance,
the flow rate increases.
In other words, in the case of the same output, the number of filter elements can be reduced accordingly.
♦Corrosion resistance: for neutral water, acid water, alkaline water, hydrochloric acid, sulfuric acid, salt
and so on, if these materials are properly selected, the filtration equipment can be operated economically
and safely.
Stainless Steel Wedge Wire Screen Application:
Stainless Steel Wedge Wire Screen is widely used throughout the world for water, oil & gas wells,
and is the dominant screen type used in the water well industry. The welded stainless steel wire wrap
screen is made up of rods and profile wire. The rod can be round wire, triangular wire or trapezoid wire.
The profile wire is triangular wire (V-shaped wire). This type of wire wrap screen has a structure and high
open area, as well as accurate slot dimension. The wire is attached to the rods by welding, producing
rigid one-piece units having high strength characteristics at minimum weights. Slot opening for screens
are manufactured by spacing successive turns of the outer wire to produce the desired slot size.
All slots should be clean and free of burrs and cuttings. Each slot opening between adjacent wires is
V-shaped, from the special shape of wire used to form the screen surface.
The V-shaped openings designed to be non-clogging, narrowest at the outer face and widen inwardly.
Stainless Steel Wedge Wire Screen Packing&Delivery:
Contact Person: Grace
Tel: +86-18812181938
